Induction cooking · Colorado Springs
Cook with induction. Faster, cleaner, no flame.
Induction heats the pan itself with a magnetic field. We help Colorado Springs homeowners make the switch — the cooktop or range, the 240-volt circuit, and the cookware questions.
- Brings water to a boil quickly, with precise low settings
- Nothing burns in your kitchen air
- No open flame, and the glass heats only from the pan
- Circuit work planned and installed as part of the job
Talk to us about induction
Tell us what you cook on now. We'll call to set up a free consultation.
- Cooktops & ranges
- 240-volt circuit work
- Free in-home consultation
- Call (719) 427-5404
What makes induction different
Gas heats the air around the pan; radiant electric heats glass that then heats the pan. Induction skips both steps — the pan itself becomes the heat source.
Speed
Energy goes straight into the pan, so water comes to a boil quickly — and the heat responds the moment you change the setting.
Cleaner indoor air
Gas burners release combustion byproducts such as nitrogen dioxide into your home. Induction burns nothing, which matters during long, closed-window winters.
Safer cooking
No open flame, no gas to leave on, and the glass gets warm only from the hot pan. Many models add pan detection, automatic shut-off and control locks.
Precise control
Hold a gentle simmer, melt chocolate without a double boiler, or sear hard — the settings are repeatable from one day to the next.
Easy cleanup
A flat glass surface with no grates. Because the glass itself doesn’t get as hot, spills are less likely to bake on.
Cooler kitchen
Less heat spills into the room while you cook — welcome on a July evening.
Why it makes sense here
A few things about Colorado Springs make induction an especially good fit.
- Water boils near 200°F
At over 6,000 feet, water boils at a lower temperature and cooking takes longer. Fast, strong heat helps make up the difference.
- Sealed-up winters — and smoke days
Our cold months keep windows closed, and wildfire smoke can keep them shut in summer too. With induction, there’s no combustion adding to your indoor air.
- No high-altitude gas adjustments
Gas appliances at our elevation often need adjustment for altitude. Induction has no burner to tune.
Already planning a kitchen remodel?
That’s the easiest time to switch: the circuit can be run while walls and cabinets are open. Front Range Bath also remodels kitchens — see our kitchen remodeling site.
Just replacing the cooktop?
That works too. Many induction cooktops fit openings sized for other cooktops, but sizes vary by brand, so we measure before you buy.
The circuit upgrade, explained
Most induction cooktops and ranges need a dedicated 240-volt circuit — commonly 40 or 50 amps, depending on the model and the manufacturer’s specifications. Here’s how we handle it.
- Check your panel
We look at your electrical panel’s capacity and open breaker spaces during the free consultation.
- Plan the circuit
We plan the run from the panel to the kitchen and include it in your written quote, with permits where they’re required.
- If your panel is full
We’ll explain your options, which may include panel work or choosing a model with lower power needs.
- Leaving gas behind
The gas line to the old cooktop is capped and checked for leaks. Your other gas appliances keep working.
Will my pans work?
Induction needs cookware with a magnetic base. You may already own more of it than you think.
Usually works
- Cast iron and enameled cast iron
- Carbon steel
- Most magnetic stainless steel
- Pans labeled “induction-ready”
Usually doesn’t
- Plain aluminum
- Copper (unless it has a magnetic base)
- Glass and ceramic
- Non-magnetic stainless steel
The magnet test: if a fridge magnet sticks firmly to the bottom of a pan, it will work on induction. Flat-bottomed pans that match the size of the cooking zone work best.
Switching to induction, step by step
We take care of the details so cooking day is the easy part.
Step 1: Free in-home consultation
We measure your cooktop opening or range space, check your electrical panel, and answer your questions about cooking with induction.
Step 2: Plan and written quote
You get a written quote for the induction cooktop or range plus the circuit work, gas capping and any countertop fit needed.
Step 3: Installation
We run the circuit, install and test your new induction cooktop or range, and walk you through how to use it.
Frequently asked questions
Is induction really better than gas?
It depends on what you value. Induction is typically faster, gives precise control, has no open flame and adds no combustion byproducts to your indoor air. Some cooks simply prefer cooking over a flame — we’ll help you weigh it honestly.
Will my pans work on induction?
If a magnet sticks firmly to the bottom, yes. Cast iron, enameled cast iron, carbon steel and most magnetic stainless steel work. Plain aluminum, copper and glass don’t, unless they have an induction-ready base.
Do I need to upgrade my electrical panel?
Not always. Most induction cooktops and ranges need a dedicated 240-volt circuit. If your panel has the capacity and space, we add the circuit; if not, we’ll explain the options.
Does induction make noise?
Some models make a faint hum or buzz at high settings, and many have a quiet cooling fan. Certain pans are quieter than others.
Is induction safe with a pacemaker?
Manufacturers generally advise people with pacemakers or other implanted medical devices to check with their doctor and device maker before using induction. We recommend doing that before you decide.
Are there rebates for induction?
Ask us about current utility rebates (for example Colorado Springs Utilities or Xcel Energy) — we’ll help you check what applies.
Do I need a whole kitchen remodel?
No. Many people simply replace the cooktop or range. If you’re planning a remodel anyway, it’s a convenient time to switch.
Make the switch to induction
Book a free in-home consultation. We’ll check your panel and your cooktop space, answer your questions, and follow up with a written quote.
- Call or text (719) 427-5404
- Mon–Fri, 9am–5pm
- Front Range Bath, 2755 Delta Pl, Suite B, Colorado Springs, CO 80910
Request a free consultation
We'll call you to find a time that works.